Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13637568
- Product Categories
- Friendly Links
Information Name: | Single Antistatic PET film | film | Cosmos Electronics |
Published: | 2015-03-02 |
Validity: | 0 |
Specifications: | Limited |
Quantity: | |
Price Description: | |
Detailed Product Description: | Plastic film from the film by the gravure printing method on future designs, landscaping products can play a role in the packaging of goods with good publicity, has unique advantages unmatched by other printed materials. However, the most common of polyoxyl film material (PE, PP, modified polyolefins, etc.) are non-polar polymers, the surface free energy is relatively low, only 2.9 ~ 3.0 × 10-6J / cm2. Theoretically, if a surface free energy lower than 3.3 × 10-6J / cm2, then it is almost impossible to pay any of the presently known adhesive. Therefore, to make the ink on the printed surface of the polyolefin eligible for certain fastness, it must increase its surface free energy of the film, based on current technological requirements, should reach 3.8 ~ 4.0 × 10-6J / cm2 job. So far, the effective treatment of plastic film at home and abroad is the most commonly used method of corona treatment. Peel force of the release paper from the film depends on the number of the formulation and coating amount of the silicone oil, the amount of coating directly affects the release properties. Higher coating amount, it is possible to densely cover the base paper, to ensure uniform distribution of silicone oil. The lower amount of white silicone coated PET film antistatic, then painted and so prone to leak, resulting in eliminating bad. Some vendors release coating to reduce the amount of silicone coating, resulting in peeling emphasis produce heavy release paper, when used is a considerable risk. Reliable manufacturers in the coating amount of the silicone oil without lowering the premise, to achieve the peel force adjusted by adjusting the chemical formula. It takes a fairly long period of accumulation of technology, rather than overnight. Room temperature peel strength, peel strength at room temperature data obtained by the standard test method, the unit is N / 25mm, can be converted into the number of grams. General 0.15N / 25mm, or 15 grams of peel force, known as light peel; 0.250N / 25mm black retardant PC film, that 20-30 grams of peel force, known as the peel; 0.4 ~ 0.6N / 25mm, i.e., 40-60 grams of peel force, known as re-peeling; course, there are 0.03 ~ 0.05N / 25mm, i.e. the peel force of 3 to 5 grams, commonly referred to as ultra-stripping; also 1.00N / 25mm frosted PC film, i.e., 100 g above peel force, commonly known as overweight peel. Residual adhesiveness rate, means after a first release paper peeling, peeling of the second force, calculated by the data obtained reflects mainly the effect curing silicone oil. Single Antistatic PET film | film | Cosmos Electronics provided by Electronic Material Co., Dongguan City, Manhattan. Electronic Materials Co., Ltd., Dongguan City, Manhattan (www.ccwatai.cn) strong, credible, in Dongguan, Guangdong insulation industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead the Cosmos into the brilliant electronic and you work for a better future! |
Admin>>>
You are the 12363 visitor
Copyright © GuangDong ICP No. 10089450, Electronic Materials Co., Ltd., Dongguan City, Manhattan All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 12363 visitor
Copyright © GuangDong ICP No. 10089450, Electronic Materials Co., Ltd., Dongguan City, Manhattan All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility